Dulux
DULUX WATERBASE SEALER
DULUX WATERBASE SEALER
Couldn't load pickup availability
Product Description
Surface preparation product - a high quality styrene acrylic water-based sealer for
interior and exterior masonry surfaces such as brickwork, plaster, cement and
textured walls. It is suitable for use on both new and previously painted surfaces.
Dulux Sealer (water-based) conforms to the Singapore Green Labelling Scheme
(032-038-0506).
- Dulux Waterbase Sealer is a premium quality, waterbased masonry sealer
- Suitable for interior and exterior masonry surface such as brickwork, plaster, cement, and asbestos which is not fully dry
- Suitable for use on both new and previously painted surfaces
- Its special acrylic emulsion ensures excellent alkali resistance
- High content of this emulsion minimizes the risk of efflorescence and seals off the substrate
- Enhances Weathershield
Tips & Advice
1. Preparing the Surfaces
Surface must be sound, clean, dry and free from all defective or poorly
adhering material, dirt, grease or wax and be rubbed down using a suitable
abrasive paper and dusted off. Treat areas affected by fungi or algae with
Dulux Fungicidal Wash. If surfaces remain powdery or suffer from alkali
attack after thorough preparation, seal with one coat of an appropriate
sealer.
2. Cleaning
Clean all equipment with clean water immediately after use.
3. Storing
Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
